Table of Contents
Advertisement
ibaFOB-io-ExpressCard
6
Device view
6.1
Front view
6.2
Link status indicators
LED
Run
(green)
Link Slow
(yellow)
Link Fast
(white)
Error
(red)
Status
Description
Flashing
Power is on and the channel is functioning properly
OFF
Controller stopped (hardware failure)
ON
Receiving telegrams on this channel with 2 Mbit/s, 3.3 Mbit/s or
5 Mbit/s, link correctly configured
Flashing
Receiving telegrams on this channel with 2 Mbit/s, 3.3 Mbit/s or
5 Mbit/s, but link configured for another protocol
OFF
No 2 Mbit/s, 3.3 Mbit/s or 5 Mbit/s telegrams detected or fiber
not connected
ON
Receiving telegrams on this channel with 32 Mbit/s, link cor-
rectly configured for 32 Mbit/s
Flashing
Receiving telegrams on this channel with 32 Mbit/s, but link
configured for another protocol
OFF
No 32 Mbit/s telegrams detected or fiber not connected
ON
Watchdog alarm
Flashing
Running the "Golden FPGA Flash Rescue mode"
OFF
Normal state
Manual
1
4 LEDs for link status
2
Fiber optic input
3
Fiber optic output
Issue 1.2
11
Advertisement
Table of Contents
