General problems with the tumble dryer
Issue
You can hear operating
noises (buzzing/hum-
ming).
A programme does not
start
The display is dark and
the Start/Add laundry
sensor control is
flashing slowly.
The dryer is switched
off at the end of the
programme.
The display is in a
different language.
The interior drum
lighting does not come
on.
Cause and remedy
This is not a fault.
The compressor (heat pump) is operating.
No action required. These noises are quite normal
and can be heard when the compressor is
operating.
No obvious cause.
Connect the tumble dryer to the mains
Turn on the tumble dryer
Close the door
Check whether the mains fuse has tripped
Has there been a power cut? When power is
restored any previously running programme will
restart automatically.
The display has switched off automatically to save
energy (Standby mode).
The drum will turn at intervals when the tumble dryer
is in the anti-crease phase.
Press any control. This switches Standby off.
The tumble dryer switches off automatically. This is
not a fault, but a normal function.
A different language has been selected in "Settings,
Language ".
Set the language you want. The flag symbol serves
as a guide.
Not a fault. The drum lighting switches off
automatically in the following cases:
If the door is closed.
If the door remains open for an extended period of
time.
Problem solving guide
61