General Problems With The Tumble Dryer - Miele TWJ 660 WP Operating Instructions Manual

Heat pump tumble dryer
Hide thumbs Also See for TWJ 660 WP:
Table of Contents

Advertisement

General problems with the tumble dryer

Problem
There are operating
noises (whirring/
humming).
A programme cannot be
started.
The display is dark and
the Start/Add laundry
sensor is flashing
slowly.
The dryer is switched
off at the end of the
programme.
The display is in a
different language.
The interior drum
lighting does not come
on.
Possible cause and remedy
This is not a fault.
The compressor (heat pump) is operating.
 No action is required. These noises are normal and
caused by the operation of the compressor.
There is no obvious cause.
 Connect the tumble dryer to the mains electricity
supply
 Turn on the tumble dryer.
 Close the door.
 Check whether the mains fuse has tripped.
Has there been a power cut? When power is
restored, any previously running programme will
restart automatically.
The display has switched off automatically to save
energy (Standby mode).
The drum will turn at intervals in the Anti-crease
phase.
 Touch any sensor. This switches Standby off.
The tumble dryer switches off automatically. This is
not a fault, but a normal function.
A different language has been selected in "Settings -
Language ".
 Set the language you want. The flag symbol serves
as a guide.
This is not a fault. The drum lighting switches off
automatically in the following cases:
If the door is closed.
If the door remains open for an extended period of
time.
Problem solving guide
63

Advertisement

Table of Contents
loading

Table of Contents