Selecting an extra option
Freshen up
Anti-crease
Touch a sensor control to select the
desired extra option.
The relevant sensor control will light up
brightly.
Freshen up and Gentle tumble cannot
be combined, see "Extra options" for
other notes.
Delay start/SmartStart
Delay start
With the delay start function, you can
choose when you want the
programme to start.
This function is active when the
SmartGrid
is switched off.
The hours can be set from
The minutes can be set in 15 minute
increments from
Gentle tumble
Buzzer
00
to
24
00
to
45
.
4. Selecting programme settings
Setting the delay start time
Touch the sensor.
The following will appear in the display:
Start in
Set the hours with the sensors.
Confirm with the OK sensor.
The display will change:
Start in
Set the minutes with the sensors.
Confirm with the OK sensor.
Tip: The values will count upwards and
downwards automatically if you keep
your finger on the or sensor
control.
Altering Delay start
The selected delay start time can be
changed before the programme start.
.
Touch the sensor.
Change the specified time and
confirm with the OK sensor.
Cancelling delay start
The selected delay start time can be
cancelled before the programme starts.
Touch the sensor.
The selected delay start time will
appear in the display.
Set a time value of
sensors. Confirm with the OK
sensor.
00
:00
h
06:
45
h
0:00 h
with the
OK
OK
33