Starting A Programme - Miele TWJ 660 WP Operating Instructions Manual

Starting the programme
 Touch the flashing Start/Add laundry
sensor control.
The Start/Add laundry sensor control
will light up and Drying appears in the
display.
Notes
If a delay start time has been selected,
then this will count down in the time
display. At the end of the delay start
time or immediately after the
programme has started the programme
duration will appear in the time display.
With a longer delay start time, the drum
will rotate occasionally to untangle the
laundry. This is not a fault.
- The Perfect Dry indicator will only
flash/light up with programmes with
selectable drying levels (see also
"Operating the tumble dryer").
- The dryer measures the residual
moisture of the laundry and
calculates the required programme
duration.
If a small load or dry laundry is
placed in the dryer, it is dried/aired
for a preset duration. In this case the
Perfect Dry indicator does not light
up at the end of the programme.
To prevent laundry wearing out
avoid overdrying it.

5. Starting a programme

The drying level reached for the
selected drying level programme will
light up in the display.
You can view the selected drying level
or time again:
 Touch the  or  sensor.
- Before the programme finishes, the
laundry is cooled.
Energy savings
After 10 minutes, the indicators dim.
The Start/Add laundry sensor control
flashes slowly.
 Touch the Start/Add laundry sensor
control to switch the indicators on
again (this does not have any effect
on a running programme).
The drum lighting switches off once the
programme has started.
Adding laundry
You can add laundry items after the
programme has started.
 Follow the description in "Changing
the programme sequence – Adding or
removing laundry".
35