Talkswitch TS-480i Using Manual

Using your TS-480i IP Phone with TalkSwitch

Accessing Features

Notes:
1.
If the feature keys are programmed for a specific feature then follow the
first instruction for the appropriately labeled keys; otherwise, follow
alternate instructions.
2. If the extension is configured to use Direct Line Access, then some
features may require you to dial ›› before dialing the feature code or
placing internal calls.
Accessing an Outside Line
Dial hunt group 9 or 81-88. No hunt group is required if Direct Line Access
is enabled for this extension.
Activate/Deactivate Do not Disturb
Press DND softkey, then on the next screen select ON or OFF; otherwise
dial ›62 to toggle ON or OFF.
Pick up — Any Inbound Call Ringing at Any Extension
Press the Pickup Any softkey, otherwise dial *9.
Pick up — Specific Extension
1. Press Pickup Ext softkey.
2. On the next screen, enter the extension.
3. Press the Pickup softkey; otherwise dial *7 + extension.
Place a Caller on Hold
Press the Hold button.
Retrieve a Caller on Hold
Select flashing Line key or Pickup softkey.
Cycle through Callers on Hold or Queued
1. Press the Line key associated with the caller on hold;
or
If programmed, press the Queue key to see a list of queued calls.
2. Select the call you wish to retrieve.
Answer Call Waiting
Press the Answer softkey or the Line key associated with the new call.
Call Transfer
1. Press button + extension + Dial softkey.
2. To complete the transfer, press
Voicemail Transfer
1. Press button.
2. Press * + extension.
3. Press the Dial softkey.
4. Press to complete the transfer.
Cancel Transfer
1. Press the Cancel softkey while in transfer state.
2. Press the Pickup softkey or flashing Line key to connect to the caller on
.