Page 2
Store the press with the cylinder’s piston fully retracted. We recommend you wrap the cylinder in a protective plastic or place it in a location free of dirt, dust, steel shavings and other foreign matter, which can enter into the cylinder and damage its components. 2. TECHNICAL FEATURES HYDRAULIC CYLINDER MODEL KC02013 • 23, 22 ton Max. Pushing Capacity (ton) •...
Page 3
Hands protection Used materials and components are not for the health and safety of operators. The hand pump contains LARZEP hydraulic oil ISO:HV46. HIDRAULIC OIL IS TOXIC IF IT ENTERS THE BLOODS STREAM. NEVER PLACE A FINGER OVER ANY ORIFICE OR LEAK, WHICH COULD BE PRESSURIZED, SUCH AS THE HYDRAULIC LINE, AS THIS COULD CAUSE OIL TO BE INJECTED INTO BLOOD STREAM.
Page 4
The hydraulic circuit of the press is closed, so in normal conditions no oil leakage should be coming up. In case of oil leakage, after the proper repairing work, you should fill up the tank with hydraulic oil by LARZEP (Ref. AZ8901); the pump is equipped with an oil level indicator to control the need quantity of oil.
Page 5
Instruction Manual Bench Handpump press 20 ton “ECM02013” 7. DECLARATION OF CONFORMITY.
Page 6
Instruction Manual Bench Handpump press 20 ton “ECM02013” GENERAL DRAWING Nº 1...
Page 7
Instruction Manual Bench Handpump press 20 ton “ECM02013” GENERAL DRAWING Nº 2...
Page 8
Instruction Manual Bench Handpump press 20 ton “ECM02013” GENERAL DRAWING Nº 3...
Need help?
Do you have a question about the KC02013 and is the answer not in the manual?
Questions and answers