Delta AS Series Manual page 453

Ch ap te r 11 De viceNe t M as ter Sca nner Mo du le AS01DN ET-A
2.
Move the DeviceNet slaves from the left list to Scan List of the right side. Follows the steps: Select one
DeviceNet slave node and then click
by one.
3.
Click OK to finish the configuration above. Then download the configuration data to AS01DNET-A. During
the download, the Warning dialog box will pop out if AS PLC is in RUN mode. Click OK to continue the
download.
>
. Then the DeviceNet slave nodes are moved to the Scan List one
11
11 - 2 7