12 -Cleaning, Sanitising And Maintenance Of The Incubator At The End Of Cycle; Disposal - Borotto REAL Series Instruction Manual

12 –Cleaning, sanitising and maintenance of the incubator at the end of
cycle.
The activities for cleaning, sanitising and maintenance must be performed with machine off, unplugged and after
a sufficient time to allow hot parts to cool down.
Cleaning incubator bottom: at the end of the cycle thoroughly wash the bottom of the incubator with a water
softener to remove any scaling left during water evaporation (do not use steel wool or scrapers to remove the
scale), rinse thoroughly with water to remove all water softener residues before moving to the sanitising stage in
order to avoid chemical reactions.
Sanitising incubator bottom: disinfect it with bleach or Amuchina (the one used for laundry is fine), then pour
about half a glass at the bottom of the incubator with a little water, shake the incubator so that the liquid covers
every part of the base including the walls, then rinse as well as possible.
MANDATORY: TO SANITISE THE INCUBATOR BASE ONLY USE BLEACH OR AMUCHINA! IT IS FORBIDDEN TO USE
ALCOHOL OR OTHER CHEMICALS.
If you disinfect the inside of the incubator with alcohol or other chemical detergents, when the incubator is used
again the residual chemical particles will affect the embryos leading to infections and resulting in death on
hatching.
Do not remove the automatic egg turner from the incubator.
Incubator cover plate cleaning: accurately clean the outside of the cover plate with a soft cloth moistened with
alcohol.
Blow the inside of the cover plate with compressed air to remove the down lost by chicks during hatching.
NOTE: SANITISING MUST BE PERFORMED BEFORE INCUBATING
STORAGE: perfectly dry the inside of the incubator, operating it dry for 2/3 hours.
Store the incubator in a dry and clean place, away from shocks and changes in temperature.
Do not place any objects on top of the incubator.
No electrical maintenance is to be performed by the user.

13 - Disposal

In implementation of Directives 2002/95/EC, 2002/96/EC and 2003/108/EC, relative to the use of hazardous
substances in electrical and electronic equipment and the disposal of waste, the symbol of the crossed wheelie
bin, shown here, indicates that at the end of its service life the product must be collected separately from other
waste.
The user shall therefore deliver the appliance at the end of its service life to the suitable electric and electronic
separate waste collection facilities.
Appropriate separate collection for subsequent recycling of the decommissioned appliance, treatment and
environmentally compatible disposal contributes to avoiding possible negative effects on the environment and
health and promotes the recycling of the materials the appliance consists of
Unlawful disposal by the user involves the application of the administrative sanctions provided for by the laws in
force.
The information related to the correct procedure of available collection systems must be obtained from the Local
Waste Disposal Service.
AEE ITALY REGISTRATION NUMBER: IT14080000008557
Rev 01
Page 16 of 20