Identification Plate - Borotto REAL Series Instruction Manual

10
1 Cover
2 Inspection window
3 Control panel
4 Tray filling nozzles
5 Electrical cable
6 Automatic egg turning unit
7 Egg tray element
8 Element joint rod
9 Bottom grate to be only used at hatching (last 3 days)
10 Digital display
11 Resistor on LED
12 Temperature control buttons

3 - Identification plate

The equipment is fitted with an identification plate showing the equipment's identification details and the main
technical specifications.
MODEL REAL INCUBATOR
Year XXX Code RXX
Serial number XXXX
Weight XXXXX
Maximum power XXXX
Voltage 230 V 50/60 Hz IP 24
Made in Italy
(accessory – may be supplied already installed according to the required model)
INCUBATRICI BOROTTO
Via Papa Giovanni Paolo II, 7/A
37060 Buttapietra (VR) Italy
11
12
Rev 01
Page 6 of 20