Maintenance Instructions For The Mini - Alert-it Companion Mini Handbook

Maintenance Instructions for the mini

14
Routine Testing
It is recommended to test the system weekly by simulating spasm movements on the bed for 15 seconds (the
default time unless changed by a user via programming) & ensure the Connect-iT is triggered by observing the red
"Alarm" LED on the Connect-iT and the activation of any connected 3rd party radio or wired system.
How to Clean the Devices
It is also recommended to regularly clean the units by wiping with cotton wool pads moistened (compressed until
dripping stops) with a mild detergent (0.5% washing up liquid) solution or by using an alcohol or baby wipe. Avoid
getting any liquid into the micro-USB connector.
Changing Battery's in the Companion
mini
Remove the base of the monitor as shown on page 13. Also please notice the polarity marked into the case
(Figure. 9) when replacing the 2x AAA batteries.
After changing the battery's, the monitor MUST be turned on again by pressing the recessed TEST button and
waiting for the 60 second test mode to finish.
Figure 9 Figure 10