Applied Instruments XR-3 Manual page 8

Wi-Fi Operations
2.7 Wi-Fi Options
You can customize a few Wi-Fi options settings:
1) Auto Connect – Select "OFF" or "ON" using left or right arrow button. If ON, the meter
will automatically connect to one of your favorite Wi-Fi networks (if it's detected to be
within range) upon selecting "Wi-Fi" from the Main Menu.
2) Show IP – If connected wirelessly, press the 'Show IP' soft-key to display the IP
address that has been assigned to the XR-3.
3) Hands Free Cfg – Specify the SSID and Password for your XR-3 if you'd like to
connect to the XR-3 directly from your mobile device (i.e. Android phone or tablet)
using the XR-3 Remote app
4) Upload Config – Press to edit the File Upload Configuration, as described below in the
Upload Configuration section, to specify the webserver domain, subdirectory, username,
and password to use for the file upload destination.
5) Dnload Config – Press to edit the File Download Configuration, as described below in the
Download Configuration section, to specify the webserver domain and subdirectory where
the meter files will be downloaded from.
2.8 Download Configuration
Most commonly, the files being downloaded will be software update files for the meter. We
recommend using the default settings (press Default soft-key to load those). Then press Save.
Your company may wish to distribute updates on your own schedule from your own server. In
this case you would need to enter your own server's address on this screen.
Page 8
XR-3