Instrument Display During A Run; Run Screen Features - Thermo Scientific Invitrogen PowerEase Touch PS0120 User Manual

Chapter 2 Methods
2

Instrument display during a run

Instrument display during a run

Run screen features

20
After touching Start run, the run is initiated, and the Run screen is displayed for the
selected method.
As an example, a Run screen and a Method Settings screen for a constant voltage
custom method is shown in the following figure:
Figure 12 Run screen and Methods Settings screen
Method name
1
Center dial with digital timer countdown, step number and visual countdown indicator
2
Real time output parameters (mA, V, W)
3
Crossover indicator
4
Stop and Pause buttons
5
Right arrow for navigation to method settings screen
6
Method name
The name of the method will be displayed at the top of the screen. If the method is
an un-named custom method, the name displayed will be the method type (Constant
Voltage, Constant Current, or Constant Power). The method displayed in Figure 12 is
a custom constant voltage method.
Center dial
The center dial displays:
• Countdown timer in hours, minutes, and seconds (example: 01:27
minutes, 35 seconds). The timer resets for each step in a multi-step method.
• A colored visual indicator for time remaining in the method
• "Running" status
• The method step currently being run (for multistep methods only)
PowerEase ™ Touch 120W Power Supply User Guide
= 1 hour, 27
35