Add A Step; Delete A Step; Save A Program - Thermo Scientific Invitrogen PowerEase Touch PS0120 User Manual

Add a step

Delete a step

Save a program

PowerEase ™ Touch 120W Power Supply User Guide
1. Touch Actions, then Add step (see Figure 9).
This will bring up the Constant Voltage, Constant Current, or Constant Power
screen, depending on the method type selected for the method (see Figure 5).
2. Repeat for additional steps.
The step number will be displayed below the constant parameter value (see
Figure 11). To view adjacent steps when viewing the constant parameter screen,
touch the left arrow (previous step) or right arrow (next step).
3. When all of the steps have been entered, touch Start run to initiate the run.
To
previous
step
Figure 11 Method step number location
1. Navigate to the step to be deleted using the left and right arrows on the
Constant parameter screen (see Figure 11).
2. Touch Actions, then Delete step.
1. Touch Actions, then Save As.
2. Touch the name field in the Save As screen to bring up the keyboard, then enter
the method name.
3. Touch Enter, then touch Save.
Chapter 2 Methods
2
Manage methods
To
next
step
19