Table of Contents
Advertisement
Quick Links
User's Manual
HST 300 Manual USB 2.0
Inliegende deutsche Fassung der Anleitung ist der Urtext, welchen inliegende Übersetzungen wiedergeben.
The German version of the manual enclosed herein is the original copy, reflected in the translations herein.
La version allemande ci-après représente le texte original du manuel, rendu par les traductions ci-joint.
La versión alemana adjunta está el texto original de las instrucciones, que también representan las traducciones de esta.
Приложенная немецкая версия руководства является оригинальным текстом, с которого сделаны включенные переводы.
A versão em alemão desse manual anexo é a versão original, e foi a base para as traduções para as outras línguas.
Vejledningens tyske version er originalteksten, som de foreliggende oversættelser gengiver.
HÜRNER SCHWEISSTECHNIK GmbH
Nieder-Ohmener Str. 26
35325 Mücke (Atzenhain)
Version April 2019
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HURNER HST 300 Manual USB 2.0
Summary of Contents for HURNER HST 300 Manual USB 2.0
- Page 1 User’s Manual HST 300 Manual USB 2.0 Inliegende deutsche Fassung der Anleitung ist der Urtext, welchen inliegende Übersetzungen wiedergeben. The German version of the manual enclosed herein is the original copy, reflected in the translations herein. La version allemande ci-après représente le texte original du manuel, rendu par les traductions ci-joint.
-
Page 3: Table Of Contents
Indication of Power Supply Failure at the Last Welding ..14 Configuring the Welding Unit ..........14 Selecting the Display Language ..........14 Setting the Clock ................ 15 Setting the Buzzer Volume ............15 Version April 2019 HÜRNER HST 300 Manual USB 2.0 User’s Manual... - Page 4 9.2.7 Emergency Off ................17 9.2.8 Power Supply Failure at Last Welding ........17 Technical Specifications ............. 17 Service and Repair Contact ............17 Accessories/Parts for the Product ..........18 HÜRNER HST 300 Manual USB 2.0 User’s Manual Version April 2019...
-
Page 5: Introduction
Thank you very much for purchasing our product. We are confident that it will meet your expectations. The HST 300 Manual USB 2.0 Welding Unit is designed exclusively for welding plastic pipe fittings according to the electrofusion process. It represents the next generation of the tried and tested HST 300 series, featuring a broader range of functions. -
Page 6: Securing The Fitting And The Joint
General Remark Comply with the indications and instructions about prod- uct maintenance to ensure proper and safe work. Use HÜRNER HST 300 Manual USB 2.0 User’s Manual Version April 2019... -
Page 7: 2.9 Power Supply Specifications
The working output power of the generator de- creases by about 10% per 1,000 m of altitude. During the welding process no other device con- Important nected to the same generator should be operated. Version April 2019 HÜRNER HST 300 Manual USB 2.0 User’s Manual... -
Page 8: Service And Repair
When sending the product, it should be placed into the transport box at all times. Principles of Operation The HST 300 Manual USB 2.0 allows welding electrofusion fittings that require of welding voltage from 8 V to 48 V. Every fitting has its own, specific welding voltage and welding time. -
Page 9: Check-Out And Operation
Terminals and push-on adapters should be considered consumables and, therefore, have to be checked before every welding operation and replaced if damaged or dirty. Version April 2019 HÜRNER HST 300 Manual USB 2.0 User’s Manual... -
Page 10: Entering Welding Voltage And Time
The cooling time as given in the fitting manufacturer’s in- structions has to be respected. Note that for that time the pipe fitting joint which is still warm must not be subjected to an external force. HÜRNER HST 300 Manual USB 2.0 User’s Manual Version April 2019... -
Page 11: Downloading The Reports
The Service Report option is not important for normal operation. In the scope of computer-assisted unit service, this report lists the events related to the maintenance of the welding unit. Version April 2019 HÜRNER HST 300 Manual USB 2.0 User’s Manual... -
Page 12: Downloading All Reports
START/SET key is pressed at this point, a further confirma- tion message “Delete Memory, sure?” is shown, which has to be confirmed by pressing the START/SET key once again. Then, the report data in memory are deleted. HÜRNER HST 300 Manual USB 2.0 User’s Manual Version April 2019... -
Page 13: Keeping Data In Memory
800 seconds. The display and the welding report will show an “Overheated” message. Version April 2019 HÜRNER HST 300 Manual USB 2.0 User’s Manual... -
Page 14: Indication Of Power Supply Failure At The Last Welding
English appears. Francais Display 8 Use the arrow keys ñ and ò to select one of the options, “Deutsch,” “English,” and “Français” and confirmby press- ing the START/SET key. HÜRNER HST 300 Manual USB 2.0 User’s Manual Version April 2019... -
Page 15: Setting The Clock
The welding unit has to be disconnected immediately from both the power supply and the fitting. The auto-test has detected an error in the system. The unit must no longer Version April 2019 HÜRNER HST 300 Manual USB 2.0 User’s Manual... - Page 16 The output current value is in excess; possible causes: short- circuit in the heater coil or the welding cable. During the start stage the upper abort threshold equals 1.18 times the HÜRNER HST 300 Manual USB 2.0 User’s Manual Version April 2019...
- Page 17 Tel.: +49 (0)6401 9127 0 35325 Mücke, Germany Fax: +49 (0)6401 9127 39 Web: www.huerner.de E-mail: info@huerner.de We reserve the right to change technical specs of the product without prior notice. Info Version April 2019 HÜRNER HST 300 Manual USB 2.0 User’s Manual...
- Page 18 35325 Mücke, Germany Accessories/Parts for the Product Connection Terminal 4.0 threaded (fitting connector of welding cable) 217 - 010 - 061 Push-on Elbow Adapter 4.0 - 4.7 216 - 010 - 630 Adapter Bag 216 - 030 - 310 HÜRNER HST 300 Manual USB 2.0 User’s Manual Version April 2019...
- Page 19 Verantwortung, dass das Produkt déclarons sous notre seule responsabilité que le produit declaramos sob nossa exclusiva responsabilidade que o produto HÜRNER HST 300 Manual USB 2.0 Schweißautomat zur Verarbeitung von Elektroschweiß-Fittings Appareil pour l’électrosoudage par fusion des raccords de tuyauterie, Máquina de solda por eletrofusão,...
- Page 20 заявляем с полной ответственностью, что изделие erklærer som eneste ansvarlige, at produktet HÜRNER HST 300 Manual USB 2.0 Welding Device for Processing Electrofusion Fittings Máquina de soldar para los accesorios de electrofusión аппарат...
Need help?
Do you have a question about the HST 300 Manual USB 2.0 and is the answer not in the manual?
Questions and answers