Safety And Statutory Information - Baldwin Boxall OmniCarePLUS Multi-Exchange EVC Installation Instructions Manual

S
AFETY AND
OmniCarePLUS issue 1
S
TATUTORY
C
AUT ION
These Safety Precautions apply to assembled systems, however
they may not all be applicable to every item within that system.
Failure to follow these instructions and guidelines may cause
personal injury and/or damage to the equipment.
W
A R N I N G
! ! !
This equipment is intended for continuous operation and as such
should be permanently connected to the mains supply.
This unit does not contain an external mains switch.
For servicing, an all-pole Switch / Circuit Breaker with a separation
of 3 mm in each pole should be incorporated in the electrical
supply spur feeding the unit, and this must be suitably marked to
prevent inadvertent or accidental usage.
W
A R N I N G
! ! !
Always ensure that this equipment is correctly earthed by
connection to an AC mains supply with a protective earth
connection.
W
A R N I N G
! ! !
If Functional Testing, Maintenance, or Repair is to be completed
with the Mains Power (and/or battery backup) connected then this
should only be undertaken by personnel who are fully aware of the
danger involved and who have taken adequate precautions and
training.
Terminals marked with the "High Voltage" symbol are considered
hazardous and the external wiring connected to these terminals
requires installation by suitably trained personnel.
W
A R N I N G
! ! !
The 24V DC batteries used within this system can deliver
extremely high currents that can cause fire or burns.
Care should be taken to ensure tools or jewellery etc. are
prevented from causing a Short Circuit.
OmniCarePLUS Multi-Exchange EVC
I
NFORMATION
Installation Instructions
ix