Weider WESY96352 User Manual page 23

ATTACHING AND REMOVING THE SEAT
40
13
36
To attach the Seat (13), set the bracket on the Seat
Frame (36) onto the indicated pins on the Front
Upright (42). Attach the Seat Frame to the Front
Upright with the 5/16" x 2 3/4" Carriage Bolt (14) and
the Seat Knob (40).
42
For some exercises, the Seat (13) must be removed.
14
First, be sure that the chain is not attached to the leg
lever. Next, remove the Seat Knob (40) and the 5/16"
x 2 3/4" Carriage Bolt (14) from the Seat Frame (36).
Lift the Seat Frame off the Front Upright (42).
ATTACHING THE LEG LEVER TO THE LOW
PULLEY STATION
To use the Leg Lever (29), the seat must be attached
to the front upright (see ATTACHING AND REMOV-
ING THE SEAT above).
53
29
52
Attach one end of the Chain (52) to the Short Cable
35
(23) with a Cable Clip (53). Attach the other end of
the Chain to the 3/8" x 2" Eyebolt (35) with a Cable
53
Clip.
23
ADJUSTING THE LEG PRESS PLATE
Remove the Press Pin (97) from the Leg Press Plate
Welded 95
(95) and the Leg Press Arm (96).
Tube
Align the welded tubes on the Leg Press Plate (95)
with the desired set of holes in the Leg Press Arm
(96). Re-insert the Press Pin (97) through the welded
97
tubes on Leg Press Plate and the holes in the Leg
Press Arm.
96
23