Weider WESY96352 User Manual page 21

46. Remove the adhesive backing from the PRO 9635 decal and apply it to the Front Upright (42) under the
"WEIDER" nameplate as shown.
46
47. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in
HOW TO USE THE HOME GYM SYSTEM, beginning on page 22 of this manual.
Before using the home gym system, pull each cable a few times to be sure that the cables move smoothly
over the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If
the cables are not properly installed, they may be damaged when heavy weight is used. See the
CABLE DIAGRAMS on page 26 and 27 of this manual for proper cable routing. If there is any slack
in the cables, you will need to remove it by tightening the cables. See TROUBLESHOOTING AND
MAINTENANCE on page 25.
21
WEIDER
Nameplate
42
PRO 9635
Decal