Ph, Water And Wastewater - Hach PLATINUM Series Manual

pH, Water and Wastewater

1.
Install the
Potassium Chloride
Electrolyte Gel
Cartridge in the
Platinum Series pH
Electrode. (See
1.3.1
on page
assembly instructions.)
Note: This procedure
contains instructions for
ion
the sens ™2.
However, any Hach
ion
sens meter may be
used for this analysis.
2.
Prime the electrode
by pushing the
dispenser button until
gel comes out of the
reference junction.
Section
Rinse excess gel from
10
for the tip and the outlet.
(above 150 µS/cm)
19
3.
Connect the
electrode to the
ion
sens 2
pH/ISE
meter.
Note: Ensure that the
electrode has been
conditioned according
to instructions in
Section 1.3.2 on
page 12.