Page 2
TYPE TD-52 RELAY RHEOSTAT PLATE TELEPHONE RELAY (T 2 CIRCUIT) Fig. Type TD-52 Relay Without Case.
Page 5
0.2 seconds or less. For settings above 0.2 seconds, this accuracy will be There are two time settings in the Type TD-52 ±2%. relay. The time unit on the left (front view) is set by adjusting the rheostat T 2 .
Page 7
This is done by rotating the rheostat shaft, without knob, until a time delay equal to the Fig. 5. Test Circuits for Type TD-52 Relay. minimum scale marking is obtained. Then, align the knob for this delay and tighten the knob set...
Page 9
TABLE OF REPLACEABLE PARTS CIRCUIT RELAY CHARACTERISTIC STYLE D E S C R IPT IO N NUMB ER SYMBOL DC VOLTS TIME RANGES 184A064H03 Resistor, 40 Watts, 45 ± 5% ohms, center tap 24/32 187A321H01 Resistor, 40 Watts, 550 ± 5% ohms, tap at 95 48/125 ohms Resistor, 40 Watts, 2500 ±...
Page 12
WESTINGHOUSE ELECTRIC CORPORATION RELAY-INSTRUMENT DIVISION NEWARK, N. J. Printed in U.S.A.
Need help?
Do you have a question about the TD-52 and is the answer not in the manual?
Questions and answers