Plantronics Explorer 10 - Bluetooth Headset Manual

What's in the Box

NOTE Contents may vary by product.

Headset Overview

Charge port

Call button

Volume button: Cycle through volume settings

Headset LED (indicator light)

Power button

Pair and Charge

Get Paired

Be safe! Please read the separate safety guide for important safety information.

1. Wearing your headset, power it on. The first time you do this it will begin the pairing process. You hear "pairing" and the headset indicator lights flash red and blue.
   
2. Activate Bluetooth^® on your phone and set it to search for new devices.

• iPhone Settings > Bluetooth > On*
• Android^™Settings > Bluetooth: On > Scan for devices*

NOTE *Menus may vary by device.

3. Select "PLT_E10."

   If necessary, enter four zeros (0000) for the passcode or accept the connection.

   Once successfully paired, you hear "pairing successful."

Activate pair mode

Press the Call button until the indicator light flashes red and blue and you hear "pairing."

Use two phones

Multipoint technology lets you pair a second phone and answer calls on either phone. To pair a second or a new phone see "Activate pair mode."

Reconnect

Bluetooth headset has up to a 33 feet (10 meters) effective range. If you lose connection, your headset will try to reconnect. If your headset doesn't reconnect, tap the Call button or manually connect through the phone's Bluetooth device menu.

Charge

Your new headset has enough power to pair and make a few calls. It takes 2 hours to fully charge the headset; the indicator light turns off once charging is complete.

Fit

You can wear your headset on your right or left ear. To adjust the fit, rotate the earloop as shown.

The Basics

Answer or end a call
Tap the Call button.

Adjust the volume
Tap the Volume button to cycle through preset levels.

Mute
While on an active call, press and hold the Volume button for 2 seconds. You hear "mute on" or "mute off."

Redial
To call your last number dialed, double tap the Call button .

Voice dial (phone feature)
Press the Call button for 2 seconds, wait for the phone prompt and then tell the phone to dial the name of a stored contact.

Toggle Voice Prompt On/Off
When the headset is powered on and you are not on a call the voice prompts can be turned off by pushing the volume button and the call button for more than 4 seconds.

Specifications

*Support in English

Safety information: see the separate "For Your Safety" booklet

2-year limited warranty details: plantronics.com/warranty

NEED MORE HELP?
plantronics.com/support

Plantronics, Inc.
345 Encinal Street
Santa Cruz, CA 95060
United States

Plantronics BV
South Point Building C
Scorpius 140
2132 LR Hoofddorp, Netherlands

^© 2015 Plantronics, Inc. Plantronics, Plantronics Explorer and Simply Smarter Communications are trademarks of Plantronics, Inc. registered in the US and other countries, and Explorer is a trademark of Plantronics, Inc. Bluetooth trademarks are owned by Bluetooth SIG Inc., any use by Plantronics, Inc. is under license. iPhone is a trademark of Apple Inc., registered in the US and other countries. All other trademarks are the property of their respective owners. Patents pending