Weider WESY38320 User Manual page 20

52. Press two 3/4" x 1 1/2" Inner Caps (116) and a 1 1/4"
Square Inner Cap (117) into the Seat Bracket (11).
Attach the Seat (16) to the Seat Bracket (11) with
two 1/4" x 3/4" Screws (114), a 1/4" x 1 1/2" Screw
(99), and a 1/4" Washer (97).
Turn the indicated Adjustment Handle (65) counter-
clockwise several turns to loosen it. Next, pull the
Handle and insert the Seat Bracket (11) into the
Seat Frame (8). Engage the Handle into one of the
holes in the Seat Bracket, and then turn the Handle
clockwise until it is tight.
53. Press two 3/4" x 1 1/2" Inner Caps (116) and a 1 1/4"
Square Inner Cap (117) into the Backrest Bracket
(13).
Attach the Butterfly Backrest (15) to the Backrest
Bracket (13) with four 1/4" x 3/4" Screws (114).
Turn the indicated Adjustment Handle (65) counter-
clockwise several turns to loosen it. Next, pull the
Handle and insert the Backrest Bracket (13) into the
Butterfly Upright (3). Engage the Handle into one of
the holes in the Backrest Bracket, and then turn the
Handle clockwise until it is tight.
54. Attach the VKR Backrest (46) to the VKR Upright
(5) with four 1/4" x 3/4" Screws (114).
55. Wet one end of the Squat Arm (32) with soapy
water. Slide a Short Pad (20) onto the Squat Arm
as shown.
Attach a Squat Handle (33) to the Squat Arm (32)
with two 5/16" x 3/4" Button Head Screws (51).
Slide an Inner Cap w/Hole (111) onto the Squat
Handle and press it onto the end of the Squat Arm.
Wet the Squat Handle with soapy water. Slide an 8"
Handgrip (84) onto the Squat Handle.
Repeat this step with the other end of the Squat
Arm (32).
52
16
11
116
114
53
15
54
46
55
32
20
116
97
99
117
8
65
116 3
114
117
114
13
116
5
20
51
20
51
33
111
84
65
114