28. Wrap the Butterfly Cable (69) over a "V"-pulley (55).
Attach the Pulley and a Long Cable Trap (102) to
the indicated bracket on the Butterfly Upright (3)
with a 3/8" x 2 1/2" Bolt (18) and a 3/8" Nylon
Locknut (87). Make sure that the Long Cable
Trap is turned to hold the Cable in the groove of
the Pulley.
29. Remove the preattached 3 1/2" Pulleys (78) from
the Double "U"-bracket (62).
Wrap the Butterfly Cable (69) under a 3 1/2" Pulley
(78). Attach the Pulley to the Double "U"-bracket
(62) with a 3/8" x 1 3/4" Bolt (93) and a 3/8" Nylon
Locknut (87).
30. Wrap the Butterfly Cable (69) over a "V"-pulley (55).
Attach the Pulley and a Long Cable Trap (102) to
the other bracket on the Butterfly Upright (3) with a
3/8" x 2 1/2" Bolt (18) and a 3/8" Nylon Locknut
(87). Make sure that the Long Cable Trap is
turned to hold the Cable in the groove of the
Pulley.
31. Attach the Butterfly Cable (69) to the Pivot Bracket
(70) on the Right Butterfly Arm (26) with a 5/16" x 1"
Shoulder Bolt (103) and a 5/16" Nylon Locknut (86).
28
29
30
18
102
69
55
31
70
26
14
3
87
102
55
69
69
78
93
87
62
3
87
103
69
86
18