Cable Diagram - Weider WESY19610 User Manual

CABLE DIAGRAMS
The cable diagrams below show the proper routing of the Low Cable (19), the High Cable (23), the Resistance
Cable (27), and the Press Cable (58). Use the diagram to make sure that the cables and the cable traps have
been assembled correctly. If the cables have not been correctly routed, the weight system will not function prop-
erly and damage may occur. The numbers show the correct route for each cable. The starting and ending points
of each cable are labeled. Make sure that the cable traps do not touch or bind the cables.
5—Rear Upright
Bracket
3
4
Low Cable (19)
2
8
7
5
6
8—Long "U"-Bracket
2
High Cable (23)
3
4
9—Weight Stack
Resistance Cable (27)
3
8—Wide Bracket
Press Cable (58)
7
6
1—Low Pulley
23
1—High Pulley
5
7
1—Weight Stack
6
5
3
2
1—Leg Lever
2
4
4