Table of Contents
Advertisement
ENGLISH
IMPORTANT INFORMATION
IMPORTANT:
Model No.:
To aid reporting in case of loss or theft, please record the
Monitor's model and serial numbers in the space provided.
Serial No.:
The numbers are located at the rear and left side of the Monitor.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
The lightning flash with arrow-head
CAUTION
symbol, within an equilateral
triangle, is intended to alert the
RISK OF ELECTRIC SHOCK
user to the presence of
DO NOT OPEN
uninsulated "dangerous voltage"
within the product's enclosure that
may be of sufficient magnitude to
constitute a risk of electric shock
to persons.
The exclamation point within a
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
triangle is intended to alert the
DO NOT REMOVE COVER (OR BACK).
user to the presence of important
NO USER-SERVICEABLE PARTS INSIDE.
operating and maintenance
REFER SERVICING TO QUALIFIED SERVICE
(servicing) instructions in the
PERSONNEL.
literature accompanying the
product.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
WARNING: FCC Regulations state that any unauthorized changes or modifications to this
equipment not expressly approved by the manufacturer could void the user's authority
to operate this equipment.
CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to
connect the unit to other equipment. To prevent electromagnetic interference with electric
appliances such as radios and televisions, use shielded cables and connectors
for connections.
IMPORTANT INFORMATION
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Wireless Radio
For product available in the USA/Canada market, only channel 1‒11 can be operated. Selection of
other channels is not possible. This device is going to be operated in 2.412‒2.462GHz frequency range.
Important: Any changes or modifi cations not expressly approved by the party responsible for
compliance could void the userʼs authority to operate the equipment.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be installed and operated with minimum
distance 20cm between the radiator & your body.
Industry Canada Statement
This Class A digital apparatus complies with CAN ICES-003(A)/NMB-3(A)
Wireless Radio
For product available in the USA/Canada market, only channel 1‒11 can be operated. Selection of
other channels is not possible.
The device could automatically discontinue transmission in case of absence of information to transmit,
or operational failure.
Note that this is not intended to prohibit transmission of control or signaling information or the use of
repetitive codes where required by the technology.
Important: Any changes or modifi cations not expressly approved by the party responsible for
compliance could void the userʼs authority to operate the equipment.
IC Radiation Exposure Statement: This device complies with IC RSS-210 rules; Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept interference
recieved, including interference that may cause undesired operation.
"Note to CATV system installer: This reminder is provided to call the CATV system installer's attention
to Article 820 of the National Electrical Code that provides guidelines for proper grounding and, in
particular, specifi es that the cable ground shall be connected to the grounding system of the building,
as close to the point of cable entry as practical."
DEAR SHARP CUSTOMER
Thank you for your purchase of the Sharp Commercial LCD Monitor. To ensure safety and many
years of trouble-free operation of your product, please read the Important Safety Instructions
carefully before using this product.
IMPORTANT SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and
property damage if improperly handled. This product has been engineered and manufactured with
the highest priority on safety. However, improper use can result in electric shock and/or fi re. In order
to prevent potential danger, please observe the following instructions when installing, operating and
cleaning the product. To ensure your safety and prolong the service life of your Commercial LCD
Monitor, please read the following precautions carefully before using the product.
1)Read these instructions.
2)Keep these instructions.
3)Heed all warnings.
4)Follow all instructions.
5)Do not use this apparatus near water.
6)Clean only with dry cloth.
7)Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifi ers) that produce heat.
9)Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10)Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11)Only use attachments/accessories specified by the manufacturer.
12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13)Unplug this apparatus during lightning storms or when unused for long periods of time.
14)Refer all servicing to qualifi ed service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
Additional Safety Information
15)Power Sources̶This product should be operated only from the type of power source indicated
on the marking label. If you are not sure of the type of power supply to your home, consult your
product dealer or local power company. For products intended to operate from battery power, or
other sources, refer to the operating instructions.
16)Overloading̶Do not overload wall outlets, extension cords, or integral convenience receptacles
as this can result in a risk of fire or electric shock.
17)Object and Liquid Entry̶Never push objects of any kind into this product through openings as
they may touch dangerous voltage points or short-out parts that could result in a fire or electric
shock. Never spill liquid of any kind on the product.
18)Damage Requiring Service̶Unplug this product from the wall outlet and refer servicing to
qualifi ed service personnel under the following conditions:
a)When the AC cord or plug is damaged,
b)If liquid has been spilled, or objects have fallen into the product,
c)If the product has been exposed to rain or water,
d)If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an improper adjustment of
other controls may result in damage and will often require extensive work by a qualifi ed technician to
restore the product to its normal operation,
e)If the product has been dropped or damaged in any way, and
IMPORTANT SAFETY INSTRUCTIONS
Do not install the Monitor in a location in which it will be subject to water drops
such as underneath an air conditioning unit or in the vicinity of a humidifi er
• Water drops falling onto the Monitor and water entering inside it may result in fi re, electric shock, or
malfunctions.
• We recommend that you install the Monitor at least
More than 3.3 ft (1m).
3.3 ft (1m) away from the outlet of an air conditioner.
Caring for the cabinet
• Use a soft cloth (cotton, fl annel, etc.) and gently wipe the surface of the cabinet.
• Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the components of the main unit cabinet
or cause cracking.
• Wiping with a hard cloth or using strong force may scratch the surface of the cabinet.
• If the cabinet is very dirty, wipe with a soft cloth (cotton, fl annel, etc.) soaked in neutral detergent diluted
with water and thoroughly wrung out, and then wipe with a soft dry cloth.
• Avoid using benzene, thinner, and other solvents, as these may deform the cabinet and cause the paint
to peel off.
• Do not apply insecticides or other volatile liquids.
Also, do not allow the cabinet to remain in contact with rubber or vinyl products for a long period of time.
Plasticizers inside the plastic may cause the cabinet to deform and cause the paint to peel off.
Caring for the front panel
• Turn off the main power and unplug the AC cord from the wall outlet before handling.
• Gently wipe the surface of the front panel with a soft cloth (cotton, fl annel, etc.).
To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical
cloth (wet/dry sheet type cloth, etc.). This may damage the surface of the front
panel.
• Wiping with a hard cloth or using strong force may scratch the surface of the front
panel.
• Use a soft damp cloth to gently wipe the front panel when it is really dirty.(It may scratch the surface of
the front panel when wiped strongly.)
• If the front panel is dusty, use an anti-static brush, which is commercially available, to clean it.
• To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning
cloths are available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD-CLOTH-3) packs.
Call 1-877-PRO-ADV1 (1-877-776-2381) for ordering, or VISIT http://siica.sharpusa.com/
DECLARATION OF CONFORMITY:
SHARP COMMERCIAL LCD Monitor, MODEL 8M-B80AX1U
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
RESPONSIBLE PARTY:
SHARP ELECTRONICS CORPORATION
100 Paragon Drive Suite #100
Montvale, NJ 07645 USA
For Business Customers: URL http://siica.sharpusa.com/
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful inteference in which case
the user will be required to correct the interference at his own expense.
INFORMATION:
There is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
̶ Reorient or relocate the receiving antenna.
̶ Increase the separation between the equipment and receiver.
̶ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
̶ Consult the dealer or an experienced radio/TV technician for help.
TCAUZA805WJZZ
IMPORTANT SAFETY INSTRUCTIONS
f )When the product exhibits a distinct change in performance - this indicates a need for
service.
19)Replacement Parts̶When replacement parts are required, be sure the service technician has
used replacement parts specifi ed by the manufacturer or have the same characteristics as the
original part. Unauthorized substitutions may result in fi re, electric shock, or other hazards.
20)Safety Check̶Upon completion of any service or repairs to this product, ask the service
technician to perform safety checks to determine that the product is in proper operating
condition.
21)Wall or ceiling mounting̶When mounting the product on a wall or ceiling, be sure to install the
product according to the method recommended by the manufacturer.
• Water and Moisture ̶ Do not use this product near water - for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.
• Stand ̶ Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an
unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the
product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with
the product. When mounting the product on a wall, be sure to follow the manufacturer's instructions. Use
only the mounting hardware recommended by the manufacturer.
• Selecting the location ̶ Select a place with no direct sunlight and good ventilation.
• Ventilation ̶ The vents and other openings in the cabinet are designed for ventilation. Do not cover
or block these vents and openings since insuffi cient ventilation can cause overheating and/or shorten
the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they
can block ventilation openings. This product is not designed for built-in installation; do not place the
product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the
manufacturer's instructions are followed.
• The front panel used in this product is made of glass. Therefore, it can break when the product is dropped
or applied with impact. Be careful not to be injured by broken glass pieces in case the panel breaks.
• Heat ̶ The product should be situated away from heat sources such as radiators, heat registers,
stoves, or other products (including amplifi ers) that produce heat.
• The Liquid Crystal panel is a very high technology product with 33,177,600 pixels, giving you fi ne picture
details.Occasionally, a few non-active pixels may appear on the screen as a fi xed point of blue, green or
red. Please note that this does not affect the performance of your product.
• Lightning ̶ For added protection for this Monitor equipment during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage
to the equipment due to lightning and power-line surges.
• Power Lines ̶ An outside antenna system should not be located in the vicinity of overhead power
lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When
installing an outside antenna system, extreme care should be taken to keep from touching such power
lines or circuits as contact with them might be fatal.
• To prevent fi re, never place any type of candle or fl ames on the top or near the Monitor set.
• To prevent fi re or shock hazard, do not place the AC cord under the Monitor set or other heavy items.
• Do not display a still picture for a long time, as this could cause an afterimage to remain.
• To prevent fi re or shock hazard, do not expose this product to dripping or splashing.
No objects fi lled with liquids, such as vases, should be placed on the product.
• Do not insert foreign objects into the product. Inserting objects in the air vents or other
openings may result in fi re or electric shock. Exercise special caution when using the
product around children.
Precautions when transporting the Monitor
• When transporting the Monitor, never carry it by holding or otherwise putting
pressure onto the display. Be sure to always carry the Monitor by two people
holding it with two hands.
• When transporting the Monitor, never carry it by stand base.
Especially for child safety
‒ Donʼt allow children to climb on or play with the Monitor.
‒ Donʼt place the Monitor on furniture that can easily be used as steps, such as a chest of drawers.
‒ Remember that children can become excited while watching a program, especially on a "larger
than life" Monitor. Care should be taken to place or install the Monitor where it cannot be pushed,
pulled over, or knocked down.
‒ Care should be taken to route all cords and cables connected to the Monitor so that they cannot
be pulled or grabbed by curious children.
WARNING
Never place a monitor set in an unstable location. A monitor set may fall, causing serious personal
injury or death.
Many injuries, particularly to children, can be avoided by taking simple precautions such as:
‒ Using cabinets or stands recommended by the manufacturer of the monitor set.
‒ Only using furniture that can safely support the monitor set.
‒ Ensuring the monitor set is not overhanging the edge of the supporting furniture.
‒ Not placing the monitor set on tall furniture (for example, cupboards or bookcases) without
anchoring both the furniture and the monitor set to a suitable support.
‒ Not placing the monitor set on cloth or other materials that may be located between the monitor
set and supporting furniture.
‒ Educating children about the dangers of climbing on furniture to reach the monitor set or its
controls.
If your existing monitor set is being retained and relocated, the same considerations as above should
be applied.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modifi cations not expressly approved by the party
responsible for compliance could void the userʼs authority to operate the equipment. To comply with the FCC RF
exposure compliance
requirements, this device and its antenna must not be co-located or operated in conjunction with any other antenna or
transmitter.
LIMITED WARRANTY
For USA customers only
THREE YEAR END-USER COMMERCIAL APPLICATION LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the fi rst end user purchaser (the "Purchaser") that this commercial application
Sharp brand product (the "Product"), when shipped in its original container, will be free from defective workmanship and materials, and
agrees that it will, for a period of three (3) years from the date of purchase, replace the defective Product or part thereof with a new or
equivalent at no charge to the Purchaser for the period(s) set forth below.
In order to enforce the rights under this limited warranty, the Purchaser should follow the steps set forth below. The Purchaser must
be able to provide proof of purchase to the Sharp, which proof must include the date of purchase, model and serial number
To the extent permitted by applicable state law, the warranties set forth are in lieu of, and exclusive of, all other warranties, express
or implied. Specifi cally ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE EXCLUDED, ALL EXPRESS
AND IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR USE, AND FITNESS FOR A
PARTICULAR PURPOSE ARE SPECIFICALLY EXCLUDED. IF, UNDER APPLICABLE STATE LAW, IMPLIED WARRANTIES MAY NOT
VALIDLY BE DISCLAIMED OR EXCLUDED, THE DURATION OF SUCH IMPLIED WARRANTIES IS LIMITED TO THE PERIOD(S) FROM
THE DATE OF PURCHASE SET FORTH BELOW. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHT. YOU MAY ALSO HAVE
OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy
available to the Purchaser and only for the time periods set forth herein. Correction of defects, in the manner and for the period of time
described herein, shall constitute complete fulfi llment of all liabilities and responsibilities of Sharp to the Purchaser with respect to the
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.
Exclusions - This Limited Warranty does not apply to any cosmetic or consumable items of the Product or if the serial number or model
number affi xed to the Product has been removed, defaced, changed, altered or tampered with. This Limited Warranty does not cover
installation or signal reception problems. Sharp does not warrant nor shall Sharp be liable, or in any way responsible, for Products
which have been subject to abuse (including, but not limited to, improper voltage), accident, misuse, negligence, lack of reasonable
care, alteration, modifi cation, tampering, improper installation, operation or maintenance or any damages or defects in the Product
which were caused by repairs or attempted repairs performed by anyone other than a Sharp personnel or Sharp authorized servicer.
This Limited Warranty also excludes any damage to Product glass due to pressure, abrasion, scratches or actions otherwise beyond
normal operation of the Product. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or
property damage. Some states do not allow limits on warranties or on remedies for breach in certain transactions; in such states, the
limits herein may not apply.
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA, AND PUERTO RICO.
Model Specific Section
8M-B80AX1U
Your Product Model Number & Description:
Commercial LCD Monitor
(Be sure to have this information available when you need service for your Product.)
Three (3) years from date of purchase.
Warranty Period for this Product:
Any labor and materials required to remove, package and/or reinstall the Product are
Additional Exclusions from
the responsibility of the Purchaser.
Warranty Coverage (if any):
Image Retention resulting from a fi xed image being displayed for long periods of
time is not covered by this Limited Warranty (see Operation Manual on how to
prevent this).
To obtain service call Sharp toll free at 1-888-GO-SHARP. Sharp will provide
What to do to Obtain Service:
instructions on service options available for your Product. Be sure to have Model,
Serial Number and Proof of Purchase available when contacting Sharp.
If it is deemed the Product meets Limited Warranty terms, Sharp will provide
instructions for return and replacement. Please be sure to adhere to the safety
guidelines in your Product Manual and use adequate number of persons to
carry the Product. Please ensure that the Product is transported carefully in the
packaging provided with the replacement Product and ensure that the Product is
covered to avoid scratches and damage. Sharp shall not be responsible for lost,
stolen or misdirected shipments or for damage to the product incurred during
shipping.
TO OBTAIN PRODUCT INFORMATION OR ACCESSORIES, VISIT www.SharpUSA.com
Commercial Electronics Products
Sharp Electronics of Canada Ltd. ("Sharp") warrants to the first purchaser for this Sharp brand product ("Product"), when shipped in its
original container and sold or distributed in Canada by Sharp or by an authorized Sharp dealer, and Product was not sold "as is " or "sales
final" that the Product will during the applicable warranty period, be free from defects in material and workmanship, and within the applicable
warranty period, will either repair the defective Product, provide a refund to the first purchaser, or provide the first purchaser a replacement
of the defective Product.
Conditions: This limited warranty shall not apply to:
(a) Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper installation or ina ppropriate use
as outlined in the ownerʼs manual or other applicable Product documentation.
(b) Any defects caused or repairs required as a result of any Product that has been tampered with, modified, adjusted or repaired by any
person other than Sharp, a Sharp authorized service centre or a Sharp authorized servicing dealer.
(c) Any defects caused or repairs required as a result of the use of the Product with items not specified or approved by Sharp, including but
not limited to chemical cleaning agents or other foreign substances.
(d) Any replacement of accessories, consumable or peripheral items required through normal use of the Product, including but not limited
to, remote controls, AC adapters, batteries, cables.
(e) Any cosmetic damage to the Product surface or exterior that has been defaced or caused by normal wear and tear.
(f) Any defects caused or repairs required as a result of damage caused by any external or environmental conditions, including but not
limited to, transmission line/power line voltage or liquid spillage or acts of God.
(g) If the serial number or model number affixed to Product has been removed, defaced, changed, altered or tampered with.
(h) Any installation, delivery, setup and/or programming charges
How to get
service: Warranty service may be obtained by contacting Sharp and providing proof of purchase (including date of purchase)
and a copy of this limited warranty statement, as noted below. At Sharpʼs discretion, malfunctioning products may be replaced by a
refurbished model or may be repaired. The servicer may if necessary take the unit for repair at the servicer's facility. No other person
(including any Sharp dealer or service centre) is authorized to extend, enlarge or transfer this warranty on behalf of Sharp. The purchaser
will be responsible for any and all removal, reinstallation, transportation and insurance costs incurred.
The express warranties in this limited warranty are, except for purchasers domiciled in Quebec, in lieu of and, except to the extent prohibited
by applicable law, Sharp disclaims all other warranties and conditions, express or implied, whether arising by law, statute, by course of
dealing or usage of trade, including, without limitation, implied warranties or conditions of merchantability and/or quality, fitness for a particu-
lar use or purpose, and/or non-infringement. Limitations (not applicable to purchasers domiciled in Quebec to the extent prohibited under
Quebec law): (a) Sharp shall not be liable for any incidental, special, consequential, economic, exemplary or indirect damages of any kind or
nature (including lost profits or damages for loss of time or loss of use or loss of data) arising from or in any connection with the use or
performance of a Product or a failure of a Product, even if Sharp is aware of or has been advised of the possibility of such damages; (b) the
remedies described in this limited warranty constitute complete fulfillment of all obligations and responsibilities of Sharp to the purchaser with
respect to the Product and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.
Some provinces may not allow the exclusion or limitation of certain damages, or limits on the duration or voiding of implied warranties or
conditions; in such provinces, the exclusions and limits herein may not apply. This limited warranty is, except for purchasers domiciled in
Quebec, governed by the laws of the Province in Canada in which the purchaser has purchased the Product. For purchasers domiciled in
Quebec this limited warranty is governed by the laws of Quebec.
WARRANTY PERIODS (calculated from the date of original purchase):
Parts & Labour (exceptions noted)
L
C
D
M
O
N
T I
O
R
3
e y
a
s r
To obtain the name and address of the nearest Authorized Sharp Dealer, or for more information on this
Limited Warranty, Sharp Extended Warranty Offers, Sharp Canada Products or Accessory Sales, please
contact Sharp
By writing to Sharp Electronics Of Canada Ltd. at 335 Britannia Road East Mississauga,
Ontario L4Z 1W9
Calling: at 1-866-731-7730
By emailing cdnprosupport@sharpsec.com
Visiting our Web site: www.sharp.ca
Revision: 01/04/2017
GARANTIE LIMITÉE
Produits électroniques commerciaux
Bravo! Vous venez de faire un excellent achat!
Sharp Électronique du Canada Ltée (« Sharp ») garantit à lʼacheteur initial de ce produit de marque Sharp (le « produit ») que, sʼil est
emballé dans son contenant original et sʼil est vendu ou distribué au Canada par Sharp ou par un détaillant autorisé Sharp, et sʼil nʼa pas
été vendu « tel quel » ou sʼil ne sʼagissait pas dʼune « vente ferme », le produit est exempt de défaut de fabrication et de vi ce de matériau
pour la période de garantie stipulée et sʼengage auprès de lʼacheteur initial et durant ladite période à réparer la défectuosité, à lui
accorder un remboursement ou à remplacer le produit défectueux.
(a) Aux dommages causés ou aux réparations requises sur les appareils qui ont fait lʼobjet dʼun emploi abusif, de négligence, d ʼun
accident, dʼune installation inadéquate ou dʼune utilisation non appropriée, tel quʼil est mentionné dans le manuel du propriétaire ou
dans toute autre documentation applicable sur le produit;
(b) Aux dommages causés ou aux réparations requises sur les produits Sharp trafiqués, modifiés, réglés ou réparés par une entité autre
que Sharp, un centre agréé de service Sharp ou un détaillant autorisé au service Sharp;
(c) Aux dommages causés ou aux réparations requises à la suite de lʼutilisation du produit avec des articles non désignés ou approuvés
par Sharp, y compris, mais sans en être limité, des agents de nettoyage chimiques ou dʼautres substances étrangères;
(d) Au remplacement des accessoires, des articles consommables ou des périphériques, devenu nécessaire à la suite dʼune utilisation
normale du produit, y compris, mais sans en être limité, les télécommandes, les adaptateurs c.a., les piles et les câbles;
(e) Aux défauts cosmétiques à la surface ou au boîtier extérieur du produit, et qui sont attribuables à la détérioration ou à lʼusure résultant
dʼun usage normal;
(f) Aux défectuosités causées ou aux réparations requises à la suite de dommages causés par des conditions extérieures et relatives à
lʼenvironnement, y compris, mais sans en être limité, une tension de la ligne électrique ou de transmission trop élevée, du liquide
répandu ou une catastrophe naturelle;
(g) Si le numéro de série ou de modèle indiqué sur le produit a été enlevé, maquillé, modifié, altéré ou trafiqué;
(h) Aux coûts dʼinstallation, de livraison, de configuration et (ou) de programmation.
Pour obtenir un service après-vente : La réparation sous garantie peut être obtenue en communiquant avec Sharp et en fournissant la
preuve dʼachat (sur laquelle est indiquée la date dʼachat) et une copie de la présente garantie limitée, comme il est indiqué ci-après. À la
discrétion de Sharp, les produits défectueux sont soit remplacés par un modèle remis à neuf, soit réparés. Le technicien peut, au besoin,
ramener lʼappareil à son atelier pour en faire la réparation. Aucune autre entité (y compris les détaillants et les centres de service Sharp)
nʼest autorisée à prolonger la durée de la garantie, à fournir des garanties autres ou à transférer cette garantie au nom de Sharp.
Lʼacheteur doit assumer tous les coûts de démontage, de réinstallation, de transport et dʼassurance de lʼappareil.
Les garanties expresses de la présente garantie limitée remplacent, sauf pour les acheteurs domiciliés au Québec, et Sharp décline, à
lʼexception des cas où la loi en vigueur lʼinterdit, toutes les autres garanties et conditions, expresses ou implicites, découl ant de la loi,
dʼun règlement, de la conduite habituelle ou de lʼusage du commerce, y compris, mais sans en être limité, les garanties ou les conditions
implicites de qualité marchande et dʼadaptabilité à une utilisation ou à une fin particulière, et/ou dʼabsence de contrefaçon. Limites (non
aucun
cas responsable des dommages accessoires, spéciaux, consécutifs, économiques, exemplaires ou indirects de quelque type ou nature
que ce soit (y compris la perte de profits ou les dommages par suite de la perte de temps, dʼutilisation ou de données) découlant de
lʼutilisation ou du rendement dʼun produit ou de la défectuosité dʼun produit, même si Sharp est informé ou a été avisé de la possibilité
bligations
et responsabilités de Sharp envers lʼacheteur à lʼégard du produit et constituera la satisfaction entière de toutes les réclamations,
quʼelles soient en fonction dʼun contrat, dʼune négligence, dʼune responsabilité stricte ou autrement.; Dans certaines province s, il est
interdit dʼexclure ou de limiter lʼapplication de certains dommages ou de certaines limites sur la durée ou lʼannulation de certaines
garanties ou conditions implicite. Par conséquent, dans ces provinces, les exclusions et les limites indiquées aux présentes peuvent ne
pas sʼappliquer. La présente garantie limitée est, sauf pour les acheteurs domiciliés au Québec, régie par les lois de la provi nce
canadienne dans laquelle lʼacheteur a acquis le produit. Pour les acheteurs domiciliés au Québec, la présente garantie limitée est régie
par les lois du Québec.
Pièces et main-dʼœuvre (exceptions relevées)
PÉRIODES DE GARANTIE
M
O
N
T I
E
U
R
L
C
D
3
a
s n
Pour connaître le nom et l'adresse du détaillant autorisé Sharp le plus près, ou pour obtenir davantage de
renseignements sur la présente garantie limitée, sur les offres de garantie prolongée de Sharp ou sur les ventes
de produits ou d'accessoires Sharp, veuillez communiquer avec Sharp :
En écrivant à Sharp Électronique du Canada Ltée, 335 Britannia Road East,
Mississauga (Ontario) L4Z 1W9
En appelant au 1-866-731-7730
En envoyant un courriel à cdnprosupport@sharpsec.com
En visitant notre site Web : www.sharp.ca
Révision: 2017-01-04
Printed in China
TCAUZA805WJZZ
Advertisement
Table of Contents
