Sharp 8M-B80AX1E Setup Manual page 13

Names of Monitor Parts and Remote Control Buttons
Parts of the Monitor
 Front
POWER lamp
• White: ON
• Off: Power OFF
 Main body controls
Power button
MENU button
INPUT button
• On the Setup menu => "Enter" button
forward/ backward buttons
• On the Setup menu => "Upward/Downward
cursor" button
• " " button functions as "Upward cursor", and
" " button functions as "Downward cursor".
Volume (+/-) buttons
• On the Setup menu => "Right/Left cursor" button
• "+" button functions as "Right cursor", and
"-" button functions as "Left cursor".
If a message "The operation with remote control is prohibited" appears on the screen
Release the lock using the operation buttons on the main body.
1) Press the home button on the main body.
2) Select Setup using the volume buttons on the main body and then press the INPUT button.
3) Select Ecology > "Operation Lock" using the volume buttons and selection buttons, and
then press the INPUT button.
4) Select Off and press the INPUT button.
Brightness sensor/remote control receiver
=> Page EN 1
• Point the remote control unit toward this part.
EN 7
 Rear
Input 8
(HDMI)
Input 6
Digital audio output terminal
(optical)
Input 5
• AV INPUT
• AUDIO IN FOR INPUT1/INPUT6/INPUT7/INPUT8
LAN terminal (10BASE-T/100BASE-TX)
• Use this terminal for IP control, etc.
Headphone jack
( 3.5 stereo mini jack)
• Audio can be output from the speakers even
when headphones are connected. (Refer to
"Menu Operation" in the built-in Operation
Manual.)
USB1 terminal
• Use this terminal to view photos, music, and
video stored in USB memory.
USB2 terminal
Input 1 to 4 (HDMI)
Analog audio output terminal
( 3.5 stereo mini jack)
Input 7 A~D (HDMI)
• 8K signal terminal