Part Names
Remote Control Unit
7
POWER
APPS
DISPLAY
1
8
9
10
2
3
11
4
12
EXIT
RETURN
13
ENTER
14
5
6
15
A
B
C
D
GB313WJSA
1 POWER: Switch the Monitor power on or enter
standby.
2 • (DOT): Used for setting.
3 AUDIO: Select the audio mode during multichannel
audio.
4 EXIT: Turn off the menu screen.
5 VOL+/-: Set the volume.
6 MUTE: Mute the sound.
7 APPS: Display the Application menu.
8 DISPLAY: Display the information.
9 0–9: Input number.
10 MENU: Display the menu screen.
11 INPUT: Select a Monitor input source.
12 RETURN: Return to previous menu screen.
13 a/b/c/d/ENTER: Select a desired item on the
screen.
14 CH: Select the next and previous channel.
15 A/B/C/D: Playback control.
Troubleshooting
Check the following before requesting repairs.
Problem
• Power is not turned on.
• Check if the AC cord is connected properly and plugged securely into the
outlet.
• When the lamp is not lit, turn on the power using the power button on the
main body.
• An indication Temperature
• The temperature of the Monitor has risen. Get rid of the causes of the
or Temperature of Monitor
increased temperature (such as direct sunlight or hot air).
blinks, and power is turned off
• Check if the Monitor is installed in a condition or location where the
automatically.
temperature rise occurs easily. Do not cover the ventilation opening on the
back of the main body when installing.
• Frequently remove dust from internal equipment or ventilation opening if it
can be removed from the outside. For removing dust inside the equipment,
consult your dealer.
EN 8
Possible Solution