Weider Pro 3770 WESY37531 User Manual page 15

35. Wrap the Weight Cable (72) around a 3 1/2" Pulley
(24). Attach the 3 1/2" Pulley and a Cable Trap (25)
to the Butterfly Upright (1) with a 3/8" x 4" Bolt (59),
a 3/8" Flat Washer (48), and a 3/8" Nylon Jamnut
(63). Be sure that the Cable Trap is turned to
hold the Cable in place.
36. Wrap the Weight Cable (72) around a 3 1/2" Pulley
(24). Attach the 3 1/2" Pulley and a Cable Trap (25)
between the lowest holes of the Adjustable Pulley
Plates (23) hanging from the Butterfly Cable (73)
with a 3/8" x 2" Bolt (54) and a 3/8" Nylon Locknut
(50) that was removed in step 23. Be sure that the
Cable Trap is turned to hold the Cable in place.
37. Wrap the Weight Cable (72) around a 3 1/2" Pulley
(24). Attach the 3 1/2" Pulley and a Cable Trap (25)
to the bracket on the Butterfly Base (4) with a 3/8" x
1 3/4" Bolt (57) and a 3/8" Nylon Jamnut (63). Be
sure that the Cable Trap is turned to hold the
Cable in place.
38. Note: For convenience, the weights assembled
in step 9 are not shown in the following draw-
ings.
Wrap the Weight Cable (72) around a 3 1/2" Pulley
(24). Attach the 3 1/2" Pulley and a Cable Trap (25)
to the bracket on the Butterfly Base (4) with a 3/8" x
1 3/4" Bolt (57) and a 3/8" Nylon Jamnut (63). Be
sure that the Cable Trap is turned to hold the
Cable in place.
35
1
48
63
36
54
25
24
72
37
63
Bracket
38
72
25
63
Bracket
15
59
24
25
72
73
23
50
24
25
57
72
4
57
24
4