Seat Assembly - Weider 9940 User Manual

Seat Assembly

50. Locate and open the parts bag labeled "SEAT
ASSEMBLY."
Attach the Backrest (12) to the indicated holes in the
Butterfly Upright (1) with two 1/4" x 2 1/2" Bolts (79)
and two 1/4" Flat Washers (71).
51. Insert a 1/4" x 2 1/2" Carriage Bolt (45) through the
center hole in a Seat Plate (65). Attach the Seat Plate
to the Press Backrest (99) with two 1/4" x 3/4" Bolts
(49).
Insert the 1/4" x 2 1/2" Carriage Bolt (45) into the
indicated hole in the Butterfly Upright (2) and secure
it with a 1/4" Flat Washer (71) and a 1/4" Nylon
Locknut (68). Secure the other end of the Press
Backrest (99) with a 1/4" x 2 1/2" Bolt (79) and a 1/4"
Flat Washer (71).
50
12
51
99
45
20
1
79
71
79
71
49
65
2
79
68
71