Seat Assembly - Weider WESY41080 User Manual

Seat Assembly

48. Locate and open the parts bag labeled ÒSEAT
ASSEMBLY.Ó
Attach a Small Backrest (97) to the Lat Upright (1)
with two 1/4Ó x 2 1/2Ó Machine Screws (64) and two
1/4Ó Washers (37).
49. Press a 1 1/2Ó Square Inner Cap (57) into the Rear
Seat Frame (16).
Insert a 1/4Ó x 2Ó Carriage Bolt (61) through the cen-
ter hole in a Seat Plate (41). Attach the Seat Plate to
the Seat (17) with two 1/4Ó x 1/2Ó Screws (59).
Insert the 1/4Ó x 2Ó Carriage Bolt (61) through the indi-
cated hole in the Rear Seat Frame (16). Tighten a
1/4Ó Nylon Locknut (44) with a 1/4Ó Washer (37) onto
the Carriage Bolt.
Attach the other end of the Seat (17) to the Rear Seat
Frame (16) with a 1/4Ó Washer (37) and a 1/4Ó x 2Ó
Machine Screw (63).
50. Press a 1 1/2Ó Square Inner Cap (57) into the Leg
Lever (15).
Lubricate the 5/16Ó x 2 1/4Ó Bolt (62). Attach the Leg
Lever (15) to the Rear Seat Frame (16) with the Bolt
and a 5/16Ó Nylon Locknut (40). Do not overtighten
the Nylon Locknut; the Leg Lever must pivot
freely.
Insert the 5/16Ó x 2Ó Eyebolt (79) into the Leg Lever
(15) from the direction shown. Tighten a 5/16Ó Nylon
Locknut (40) with a 5/16Ó Washer (20) onto the
Eyebolt.
51. Rest the slot in the Rear Seat Frame (16) on the indi-
cated post in the Lat Upright (1). Attach the Rear Seat
Frame to the Lat Upright with a 5/16Ó x 2 3/4Ó
Carriage Bolt (77) and the Seat Knob (30).
48
97
49
61
57
41
16
44
50
40
15
20
40
57
51
20
1
37
64
17
59
37
63
16
62ÑLubricate
79
30
16
1
77
Post
Slot