Weider 831.159833 User Manual page 26

CHANGING THE WEIGHT SETTING
41
To change the setting of a weight stack, insert a
Weight Pin (81) under the desired Weight (41). Insert
the Weight Pin so that the bent end touches the
weight stack. Turn the bent end down.
To use the Bottom Weight (47) with the press arms or
the leg press, insert a Weight Pin (81) under the
41
Bottom Weight. Remove the other Weight Pin from
81
the small weight stack.
47
To use the small weight stack with the press arms or
leg press, insert a Weight Pin (81) under the Bottom
Weight (47). Then, insert the other Weight Pin under
the desired Weight (41) in the right weight stack.
Note: Due to the cables and pulleys, the amount of resistance at each exercise station may vary from
the weight setting. Use the WEIGHT RESISTANCE CHART on page 27 to find the approximate amount of
resistance at each weight station.
26