Weider 831.159380 User Manual page 19

40. Locate and open the parts bag labeled
"SEAT ASSEMBLY."
Insert a 1/4" x 2 1/2" Carriage Bolt (92)
through the center hole in a Seat Plate (37).
Attach the Seat Plate to the Rear Backrest
(85) with two 1/4" x 1/2" Screws (18).
Insert the 1/4" x 2 1/2" Carriage Bolt (92)
through the indicated hole in the Leg Press
Upright (56). Tighten a 1/4" Nylon Locknut (2)
with a 1/4" Flat Washer (10) onto the Carriage
Bolt. Attach the top of the Rear Backrest (85)
to the Leg Press Upright with a 1/4" x 2 1/2"
Screw (43) and a 1/4" Flat Washer (10).
41. Attach one end of a Seat (13) to the Rear
Seat Frame (100) with two 1/4" x 1/2" Screws
(18). Attach the other end of the Seat to the
Rear Seat Frame with a 1/4" Flat Washer (10)
and a 1/4" x 2 1/2" Screw (43).
42. Attach the Assist Seat (104) and the Angle
Bracket (110) to the Assist Arm (105) with
four 1/4" Flat Washers (10) and four 1/4" x 2
1/2" Screws (43).
40
56
43
10
2
41
42
104
110
105
10
43
19
85
92
37
18
13
100
18
18
10
43
10