Seat Assembly - Weider 831.159301 User Manual

18. Route the Long Cable (23) over the 90mm Pulley
(15). Tighten the M10 x 45mm Bolt (83) and the
M10 Nylon Locknut (21).
19. Attach the Long Cable (23) to the Small "U"-
bracket (67) with an M8 Nylon Locknut (3) and an
M8 Washer (8). See the inset drawing. Do not
overtighten the Locknut; it should be threaded
onto the end of the Cable so that two threads
are showing past the nut.
Attach the Small "U"-bracket (67) to the Weight
Tube (63) with an M8 x 45mm Bolt (72) and an
M8 Nylon Locknut (3).

Seat Assembly

20. Attach the Backrest (41) to the Front Upright (42)
with two M6 x 65mm Screws (43) and two M6
Washers (10).
18
19
23
67
72
63
20
11
55
21
Bracket
15
83
23
23
3
8
3
41
43
10
42
43
10
3
67