Yamaha MT-25 Owner's Manual page 75

1
1. Fuse box
6
2
3
4
5
1. Ignition fuse
2. Signaling system fuse
3. Headlight fuse
4. Backup fuse (for clock)
5. Radiator fan motor fuse
6. Spare fuse
If a fuse is blown, replace it as follows.
1. Turn the key to"OFF" and turn
off the electrical circuit in question.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
Specified fuses:
Main fuse:
30.0 A
1
Headlight fuse:
7.5 A
Signaling system fuse:
15.0 A
Ignition fuse:
15.0 A
Radiator fan motor fuse:
7.5 A
Backup fuse:
7.5 A
3. Turn the key to "ON" and turn on
the electrical circuit in question to
check if the device operates.
Periodic maintenance and adjustment
[EWA15132]
7-31
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
7