Yamaha MT-25 Owner's Manual page 22

Clock
1
1. Clock
The clock uses a 12-hour time system.
To set the clock
1. Push the "SELECT" button and
"RESET" button together until
it flashes.
2. Use the "RESET" button for adju-
sting the clock.
3. Push the "SELECT" button, and
the minute digits will start flashing.
4. Push the "RESET" button to set
the minutes.
5. Push the "SELECT" button for
confiming the clock.
Coolant temperature meter
MPH
MPG mile
1
1. Coolant temperature meter
The coolant temperature meter indi-
cates the temperature of the coolant.
Segments will start from "C" (cold) to
"H" (heat) as the engine temperature
increases. If the hot segment flickers
immediately turn off the engine and
allow the engine to cool (see pages
7-38)
Instrument and control functions
Transmission gear display
MPH
1
MPG mile
1. Neutral indicator light "
2. Transmission gear display
This display shows the selected gear.
The neutral position is indicated
by "
light.
Multi-function display
1. Multi-function display
4-5
2
MPH
MPG mile
"
" and by the neutral indicator
MPG mile
1
4
MPH