Yamaha MT-25 Owner's Manual page 59

3
2
1
1. Air filter case cover
2. Screw
3. Rubber cover
5. Pull the air filter element out.
1
1. Air filter element
6. Insert a new air filter element into
the air filter case. NOTICE: Make
sure that the air filter element is
properly seated in the air filter
case. The engine should never
be operated without the air filter
element installed, otherwise the
piston(s) and/or cylinder(s) may
become
2 [ECA10482]
7. Install the air filter case cover by
installing the screws, and then
place the rubber covers in their
original positions.
8. Place the left side panel in the
original position, and then install
the bolts.
9. Install the rider seat.
To clean the air filter check hose
1. Check the hose on the front of the
air filter case for accumulated dirt
or water.
1. Air filter check hose
Periodic maintenance and adjustment
excessively worn.
1
7-15
2. If dirt or water is visible, remove
the hose, clean it, and then install
it.
7