Yamaha MT-25 Owner's Manual page 24

After changing the engine oil, reset the
oil change tripmeter and the oil change
indicator. To reset them both, select
the oil change tripmeter, and then push
the "RESET" button.
TIP
If the engine oil is changed, the oil
change tripmeter must be reset. If
not oil change indicator light will not
come as suppose.
Instantaneous fuel consumption
display
1. Instantaneous fuel consumption display
The instantaneous fuel consumption
display can be set to either "MPG",
"km/L" or "L/100 km".
"km/L": The distance that can be
traveled on 1.0 L of fuel under the
current riding conditions is shown.
"L/100 km": The amount of fuel
necessary to travel 100 km under
the current riding conditions is
shown.
"MPG": The distance that can be
traveled on 1.0 Imp. gal of fuel un-
der the current riding conditions is
shown.
TIP
If traveling at speeds under 10 km/h
MPH
(6 mi/h), "_ _._" is displayed.
1
Instrument and control functions
Average fuel consumption display
1. Average fuel consumption display
The average fuel consumption display
can be set to either "AVE_ _._ MPG",
"AVE_ _._ km/L" or "AVE_ _._ L/100
km".
This display shows the average fuel
consumption since it was last reset.
4-7
1
"AVE_ _._ km/L": The average dis-
tance that can be traveled on 1.0 L
of fuel is shown.
"AVE_ _._ L/100 km": The average
amount of fuel necessary to travel
100 km is shown.
MPH
4