Page 1
OWNER’S GUIDE EGISTER POWERFUL PERFORMANCE FOR ANY ROOM For how-to videos or more information, please visit: http://cadetheat.com/install/register ESPAÑOL ver la guía del propietario en cadetheat.com/espanol/register cadetheat.com 855.CADET.US tested to UL standards Vancouver, Washington...
IMPORTANT INSTRUCTIONS When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read instructions before 7. Do not insert or allow foreign installing or using this heater. objects to enter any ventilation 2.
Connecting a 240 volt heater to a 120 volt electrical supply will only give you one quarter of the heat output. Unanswered questions? Call our technical support team in Vancouver, Washington at 855.CADET.US. PARTS OF YOUR HEATER heater element...
Page 4
INSTALLATION INSTRUCTIONS TIPS BEFORE YOU BEGIN • Verify power has been turned off before starting any work! • The Register model RM can only be mounted with the element up. It cannot be mounted in the ceiling. For multiple heater wiring, see page 6. •...
INSTALLATION INSTRUCTIONS INSERT THE HEATER ASSEMBLY IN THE WALL CAN STEP 4 Wire connections Your heater has two connection wires and the wall can has a green grounding wire. Your supply wire has two connection wires and a supply ground wire. 1.
Visit cadetheat.com/parts-service for information voids all warranties. Refer to Cadet website or call on where to obtain parts and service. customer service at 855.CADET.US for list of authorized accessories and components. To register your product, visit...
OPERATING INSTRUCTIONS 1. The heater must be properly 3. Do not tamper with the high- installed before it is used. temperature safety shutoff. 2. Do not operate without grill. How to operate your heater The room temperature is controlled by a thermostat located either on the wall, or on the heater. Once installation is complete and power has been restored, follow the steps below for your thermostat.