Dometic ProSafe MD283 Installation And Operating Manual page 24

proSafe
✓ After 10 seconds the safe opens and the display shows the message OPEN.
✓ Three short beeps sound.
Deactivating the anti-tamper system using SAM
In order to deactivate the anti-tamper system after opening the safe with the master
key, or following removal of the cover for the locking mechanism, the anti-tamper
code must be entered:
ENTER ENTER
➤ Press the ENTER button twice.
➤ Enter the six digit anti-tamper code.
➤ Press the ENTER button.
✓ The display shows an alphanumeric code in two parts
(e.g. 52115 – Ab271).
➤ Note down the code.
➤ Reattach the cover.
➤ Go to the www.sam.dometic.com page on the internet.
➤ Enter your login data.
➤ Select AT Sensor from the menu.
EN
PIN 6X ENTER
Using the safe
25