Dometic ProSafe MD283 Installation And Operating Manual page 15

Using the safe
Changing R.E.O.S. code
A
NOTICE!
• If you forget your R.E.O.S. code, nobody can access the safe any
more (not even the manufacturer). No resetting, or similar action, is
possible.
• Therefore note down the R.E.O.S. code and store it very carefully in
a safe location.
• The safe has a factory-set R.E.O.S.code. Change this code for secu-
rity reasons.
You can change the factory-set R.E.O.S. code (210104). The safe must be locked for
this.
2X ENTER CURRENT
PIN 6X
ENTER NEW
PIN 6X
ENTER NEW
PIN 6X
➤ Press the ENTER button twice.
➤ Enter the six digit R.E.O.S. code.
➤ Press the ENTER button.
✓ The display shows the message DELAY.
➤ Press the ENTER button.
➤ Enter a new six digit R.E.O.S. code within ten seconds.
➤ Press the ENTER button.
✓ The display shows the message REPEAT.
16
DELAY
ENTER
REPEAT
ENTER
ENTER
proSafe
EN