Dometic ProSafe MD283 Installation And Operating Manual page 11

Using the safe
8.2 Emergency opening using master code
The master code is necessary if guests have left the safe locked or have forgotten
their code.
Opening safe with the master code
ENTER ENTER
➤ Press the ENTER button twice.
➤ Enter the correct six digit master code.
➤ Press the ENTER button.
✓ The display shows the message DELAY. The door opens automatically after ten
seconds.
Changing the master code
A
NOTICE!
• If you forget your master code, nobody can access the safe any
more (not even the manufacturer). No resetting, or similar action, is
possible.
• Therefore note down the master code and store it very carefully in a
safe location.
• The safe has a factory-set master code. Change this code for security
reasons.
You can change the factory-set master code (210104). The safe must be locked for
this.
2X ENTER CURRENT
PIN 6X
NEW
ENTER
PIN 6X
ENTER NEW
PIN 6X
12
PIN 6X ENTER
DELAY
ENTER
REPEAT
ENTER
ENTER
proSafe
EN