Battery Maintenance - Saft 4579 Component Maintenance Manual With Illustrated Parts List

F. Visually check the temperature sensor assembly (22) as follows:
(1)
(2)
(3)
G. Check all hardware items for damage.
H. Check battery cover (8) and battery case (7) for damage.
4.

Battery Maintenance

Battery maintenance may be carried out in accordance with the flow chart in Figure 102.
SAFT AMERICA INC.
COMPONENT MAINTENANCE MANUAL
Inspect electrical connector for bent or loose pins, corrosion, cracks, faulty
wire connections and evidence of arcing. Any evidence of the above
conditions however minor, is cause for replacement. Discard the damaged
unit and replace with factory new.
Inspect charge control thermistor and thermostat for damaged, loose or broken
wire connections, cracks, dents, or other physical defects. Any evidence of the
above conditions however minor, is cause for replacement. Discard the
damaged unit and replace with factory new.
Visually check all wiring for damage to insulation, cracked or broken wire and
other physical defects. Any evidence of the above conditions however minor,
is cause for replacement. Discard the damaged unit and replace with factory
new.
NOTE: The temperature sensor assembly (22) is a non-repairable item
and should be discarded if defective.
4579
24-31-05
PAGE 503/504 BLANK
Jan 30/98