Testing And Fault Isolation; Required Test Equipment - Saft 4579 Component Maintenance Manual With Illustrated Parts List

1. General
This section contains battery functional tests and fault isolation information. Test procedures
are written in a step-by-step format following Fig 102. Fault isolation information is
presented in chart form (Fig 106).
NOTE:
2.

Required Test Equipment

NOTE:
NOMENCLATURE
DC Power Supply, regulated,
35 Vdc 0-60A minimum
Precision Multi-meter,
(precision +0.5%),
0-2 V, 0-5 V, and 0-50 V scales
required
DC Load Bank (0-60A Minimum)
Thermometer, Immersion
Megohmmeter 250 Vdc
SAFT AMERICA INC.
COMPONENT MAINTENANCE MANUAL

TESTING AND FAULT ISOLATION

All ( ) part identification numbers herein are IPL, Fig 1 item numbers.
Test equipment having equivalent specifications can be used.
Testing / Fault Isolation
Testing / Fault Isolation
Testing / Fault Isolation
Testing / Fault Isolation
Testing / Fault Isolation
Required Test Equipment
Figure 101
4579
APPLICATION
24-31-05
PAGE 101
Jan 30/98