Table of Contents
Advertisement
12
FOR THE INSTALLER
The installation must be made from qualified staff as for the regulation in force, in a position to assuring the starting and the test. Pay attention
to the choice of the model is for of the requirements of water production, see the values of water production in the scheme of the technical
data.
The modifications of the connections and the TAMPERING of the components provoke the decay of the guarantee.
Before every operation to detach the power. This product is included in group C and it can be installed in whichever premises; the passage hole
through the wall do not have to be obstructed.
These water heater must be installed on the floor leaving space for being able to make the connections and to make the maintenance.
In order to avoid infiltrations it suggested to incline towards the bottom of the aspiration and fumes pipes, leave in high part at least 20 cm
space.
200 mm
MIN
Fig. 17
Fig. 18
Consider the following distance in case of wall drain
Fig. 19
APRIL 2009 Issue (Italy)
12
Advertisement
Table of Contents
