Starting / Stopping The Engine - Stihl FS 91 Instruction Manual

B
Circular saw blades (B)
should "hover" about 20 cm (8 in)
N
above the ground.
When the correct balanced position has
been reached:
Tighten down the screw (1) on the
N
carrying ring firmly.
Disconnecting Machine from Harness
1
2
Press down the bar on the
N
carabiner (1) and pull the carrying
ring (2) out of the carabiner.
FS 91, FS 91 R
Starting / Stopping the
Engine
Controls
Version with Bike Handle
2
1
1 Throttle trigger lockout
2 Throttle trigger
2
3 Stop switch with Run and Stop
positions. Depress the stop switch
(...) to switch off the ignition – see
"Function of stop switch and ignition
system".
1
2
Version with Loop Handle
1 Throttle trigger lockout
2 Throttle trigger
3
3 Stop switch with Run and Stop
positions. Depress the stop switch
(...) to switch off the ignition – see
"Function of stop switch and ignition
system".
Function of stop switch and ignition
system
1
The ignition is switched off and the
engine stopped when the stop switch is
pressed. The stop switch returns
automatically to the Run position when it
is released: The ignition is switched on
again after the engine stops – the engine
is then ready to start.
English
3
1
2
33