Overview Of The Components /Scope Of Delivery; Notes For Use; Electrical Connection; Switching The Appliance On / Off - Profi Care PC-MS 3079 Instruction Manual

• Do not repair the appliance by yourself. Always contact an au-
thorized technician. If the supply cord is damaged, it must be re-
placed by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental ca-
pabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children
without supervision.
• Do not suck up liquids!
• Do not suck up hot ashes or pointed or sharp objects!
• Do not use the appliance in damp rooms!
• Never vacuum without the filter in place. Always check that the
filter is fitted properly after it has been inserted!
• Keep hair, clothing and body parts away from the suction opening
during operation!
• Keep the vacuum cleaner away from sources of heat like radia-
tors, ovens, etc.!
Overview of the Components /
Scope of Delivery
1 Dust container
2 Dust container handle
3 On / off switch
4 Handle
5 Ventilation openings
6 HEPA filter
7 Suction opening
8 Vibration surface
9 UV-C lamp
10 Pin base for UV-C lamp
11 Vibration button / On button for UV-C lamp
12 Casters
13 Casters (safety switch)
26
PC-MS3079_IM

Notes for Use

Electrical Connection

• Before connecting the plug to the wall socket, check
whether the mains voltage is correct. Refer to the infor-
mation on the rating plate of the appliance.
• Connect the appliance to a certified wall socket only.

Switching the Appliance On / Off

Press the on / off switch to start or shut down the appli-
ance.

Safety Switch

The appliance is equipped with two safety switches. When
pressing the vibration button the appliance must be placed
on a flat surface in order for the UV-C lamp to turn on.
20.04.20