Advertisement
ENGL ISH
Operating instructions
mounting & installation
DPWQ 502000
Room air quality (VOC) and CO
sensor,
2
with self-calibrating,
with multi-range switching,
active and switching output
DPDQ 502000
including mounting flange
Duct air quality (VOC) and CO
sensor,
2
with self-calibrating,
with multi-range switching,
active and switching output
CAREL SPA | VIA DELL'INDUSTRIA | 35020 BRUGINE ⁄ ITALY
FON + 39 0499 ⁄ 71 66 11 | FA X + 39 0 499 ⁄ 71 66 00 | w w w.carel.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Carel DPWQ502000
Summary of Contents for Carel DPWQ502000
- Page 1 CAREL SPA | VIA DELL‘INDUSTRIA | 35020 BRUGINE ⁄ ITALY FON + 39 0499 ⁄ 71 66 11 | FA X + 39 0 499 ⁄ 71 66 00 | w w w.carel.com...
-
Page 2: Technical Data
ENGL ISH DPWQ 502000 APPLICATION: DPWQ 502000 The maintenance-free, microprocessor-controlled room sensor is used to monitor the CO concentration as well as air quality (VOC). All measurands are converted to standard signals (0 -10 V or 4...20 mA). The room sensor measures CO in the range of 0...2000 ppm or 0...5000 ppm, VOC at one of three selectable sensitivity levels LOW / MEDIUM (default) / HIGH. - Page 3 ENGL ISH DPWQ 502000 DPWQ 502000 Dimensional drawing Enclosure 32.6 To open the enclosure, set a screwdriver (2.0) in the groove at centre, press down, and lift up the bottom frame slightly. Pull top cover forward and hold it. Connecting diagram DPWQ 502000 DIP switches DPWQ 502000...
- Page 4 ENGL ISH DPDQ 502000 including mounting flange APPLICATION: DPDQ 502000 Patented quality product (patent no. DE 10 2014 010 719.1) The maintenance-free, microprocessor-controlled duct sensor is used to monitor the CO con- centration as well as air quality (VOC). All measurands are converted to standard signals (0 -10 V or 4...20 mA).
- Page 5 ENGL ISH DPDQ 502000 DPDQ 502000 Dimensional drawing Mounting diagram M16x1.5 ø20 DIP switches DPDQ 502000 VOC sensitivity DIP 1 DIP 2 MEDIUM (default) M16x1.5 HIGH VOC automatic zero point DIP 3 deactivated DPDQ 502000 Connecting diagram activated (default) content DIP 4 OFFSET 0...2000 ppm (default)
- Page 6 ENGL ISH Notes regarding DPWQ 502000 and DPDQ 502000 – This device may only be used in pollutant-free non-precipitating air without above-atmospheric or below-atmospheric pressure at the sensor element. – On outdoor and duct sensors, the sinter filter of the senor element protects the humidity sensor against potential dust exposure. In case of pollution ⁄...
-
Page 7: Supply Voltage
Therefore, pay attention to correct wiring! Circuitry Circuitry Power supply AC 24V~ DC 15-36V = GND Reprints, in part or in total, are only permitted with the approval of Carel SpA. -
Page 8: Disposal Of The Product
The failure to complete such phase, which is required/indicated in the user manual, may cause the final product to malfunction; CAREL accepts no liability in such cases. The customer must use the product only in the manner described in the documentation relating to the product.
Need help?
Do you have a question about the DPWQ502000 and is the answer not in the manual?
Questions and answers