Installation method
NOTE
• To prevent damaging the imaging unit by exposure to light, keep the imaging unit in its
light-proof vinyl pouch until immediately before installing it.
• When holding the Imaging Unit, be sure to hold it by its bottom cover.
If the Top Imaging Unit Cover is hold, it may full off or the PC Drum installed on the
Imaging Unit may be damage, resulting in decreased image quality.
1. Remove the imaging unit
from its box, then remove
the light-proof vinyl pouch.
2. Tilt the imaging unit to the
left, and shake it gently
twice in the tilted direc-
tion, then tilt the imaging
unit to the right, and shake
it gently twice in the tilted
direction.
4004D324AA
3. Remove the protective
tapes.
C4004U213AA
14