Remove The Upper Case (With Keyboard And Touchpad); Disassemble The Lcd Unit; Remove The Strip Cover - Lenovo IdeaPad Flex 3 Hardware Maintenance Manual

Figure 18. Remove the LCD unit

Remove the upper case (with keyboard and touchpad)

Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 26
"Remove the battery pack" on page 27
"Remove the I/O board with cable" on page 28
"Remove the WLAN card" on page 29
"Remove the system board" on page 30
"Remove the speakers" on page 32
"Remove the thermal pad" on page 32
"Remove the LCD unit" on page 33
Go to
https://support.lenovo.com/partslookup
part:
Upper case (with keyboard and touchpad)

Disassemble the LCD unit

The LCD unit as a whole is not an FRU. Instead, it contains FRUs as its components. Before disassembling
the LCD unit, make sure it has been detached from the upper case.

Remove the strip cover

Make sure the following FRU (or CRU) have been removed.
"Remove the LCD unit" on page 33
Step 1. Remove the strip cover.
34
IdeaPad Flex 3 Chromebook (11", 05) Hardware Maintenance Manual
to look up the Lenovo part number of the following replacement