Scandomestic BIF 293 User Manual page 30

VENTILATION 2/2
An air passageway should be
provided in the top of the
cabinet run to allow free air in
and out.
There should be space at
the rear of the cabinet to
allow cool air to be drawn
over the condenser.
Recommended: 500 x
35mm.
A cutout should be made in
the plinth below the fridge/-
freezer and this finished
neatly using the air vent grille.
Alternatively, a thin section of
the plinth can be removed to
allow air into the unit
(recommended 600mm x
10mm)
16